Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 1099 / 1406

9
9
9-102
9-102
Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expansion Bus-F1/F2, the Wireless LAN Board-B1 and the IPSec Board-B2 Simultaneously
Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expansion Bus-F1/F2, the Wireless LAN Board-B1 and the IPSec Board-B2 Simultaneously
7) Install the Wireless LAN Support Plate assembled in step 1) to the Main Controller PCB 1.
• 2 Screws (Use the screws removed in step 4).)
• 2 Screws (TP; M3x6) (Included in the Wireless LAN Board)
CAUTION:
When securing the Wireless LAN Support Plate in place using the screws, be careful
not to trap the Fan Cable.
x4
8) Insert the terminal of the Bulkhead Unit to the position shown in the figure.
NOTE:
Check that the terminal is installed properly.
F-9-242
F-9-243
NOTE:
When installing the IPSec Board, go through the steps 9) through 11). When not
installing it, go on to the step 12).
9) Remove the plate of the IPSec PCB. (The removed plate will not be used.)
• 2 Screws (The removed screws will be used in step 10).)
x2
10) Install the IPSec PCB removed in step 9) to the Wireless LAN Auxiliary Plate (included
in the Wireless LAN Board).
• 2 Screws (Use the screws removed in step 9).)
IPSec Security PCB
Wireless LAN
Auxiliary Plate
x2
F-9-244
F-9-245