Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 287 / 1406

2
2
2-233
2-233
Technology > Embedded RDS > Troubleshooting
Technology > Embedded RDS > Troubleshooting
Transmission timing Detailed procedure
Transmission
information
Error occurs
When the Web browser
option license is entered /
transferred
(However, the case when
"disabling of service browser
[OFF]" is set is excluded)
1) When the power is
turned ON, check the
license condition of the
WEB browser option.
2) Send browser
information to UGW
when the license status
is OFF=>ON due to
entry of a license or
when it is ON=>OFF
due to license transfer.
Service browser mode:
Enabling [Active] or
Stopping [Suspend]
WEB browser
option: [ON] or [OFF]
according to the
license status
Retransmission
is repeated
until it finishes
successfully.
* For detailed procedures, see "Steps to Service Browser settings".
T-2-120
Troubleshooting
No.1
Symptom: A communication test (COM-TEST) results NG!
Cause: Initial settings or network conditions is incomplete.
Remedy1: Check and take actions mentioned below.
1) Check network connections
Is the status indicator LED for the HUB port to which the main unit is connected ON?
YES: Proceed to Step 2).
NO: Check that the network cable is properly connected.
2) Confirm loop back address
(a) Select [Settings / Registration (User Mode)] > [Preferences] > [Network] > [TCP/IP
Settings] > [IPv4 Settings] > [PING Command], enter "127.0.0.1", and touch the [Start]
button.
Is the response from the host displayed? (see following figure)
YES: Proceed to Step 3).
NO: There is a possibility that the main unit's network settings are wrong. Check the
details of the IPv4 settings once more.
F-2-345