Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 839 / 1406

8
8
8-57
8-57
Service Mode > COPIER > I/O (I/O display mode) > Paper Folding Inserter Unit - H1 (SORTER>P047 to P061)
Service Mode > COPIER > I/O (I/O display mode) > Paper Folding Inserter Unit - H1 (SORTER>P047 to P061)
Address bit Name Symbol Remarks
P052 7 Folding unit sensor S14 H:No unit
6 By Borah motor driver_standby signal - H:Movement is possible
L:stop
5 Reverse solenoid_PWM SL1 PWM
4 Straight path flapper solenoid PWM SL2 PWM
3 Skew correction pressure solenoid PWM SL4 PWM
2 Skew correction release solenoid PWM SL3 PWM
1 PCB LED2 - L:ON
0 PCB LED1 - L:ON
P053 7 - - -
6 DSW5 - L:ON
5 DSW6 - L:ON
4 DSW7 - L:ON
3 Upper stopper motor B PHASE M7 H:OUTX L:OUT*X
2 Upper stopper motor A PHASE M7 H:OUTX L:OUT*X
1 Upper stopper motor B ENABLE M7 H:output L:OFF
0 Upper stopper motor A ENABLE M7 H::output L:OFF
P054 7 Tray lift motor driver current - Analog output
6 Reverse unit motor driver current Analog output
5 Inserter open/close sensor S1 H:open
4 Tray paper sensor2 S8 L:paper on
3 Tray paper sensor1 S7 L:paper on
2 Paper feed sensor S3 L:ON
1 Tray lower limit sensor S5 H:lower limit
0 Paper set sensor S6 H:empty
P055 7 C fold tray motor B PHASE M6
6 C fold tray motor A PHASE M6
5 C fold tray motor B ENABL M6
4 C fold tray motor A ENABL M6
3 C fold stopper motor B PHASE M8 H:OUTX L:OUT*X
2 C fold stopper motor A PHASE M8 H:OUTX L:OUT*X
1 C fold stopper motor B ENABL M8 H:output L:OFF
0 C fold stopper motor A ENABL M8 H:output L:OFF
P056 7 Fold position adjustment motor *B M10 H:active
6 Fold position adjustment motor *A M10 H:active
5 Fold position adjustment motor B M10 H:active
4 Fold position adjustment motor A M10 H:active
3 Reverse sensor S10 H:paper on
2 C fold stopper sensor S17 H:home
1 C fold tray motor sensor S19 H:home
0 C fold tray empty sensor S18 L:paper on
Address bit Name Symbol Remarks
P057 7 C fold stopper solenoid SL7 H:Absorption
6 C fold guide solenoid SL6 H:Absorption
5 EEPROM/DA converter CLK signal - -
4 EEPROM CS signal - -
3 Tray lift motor B PHASE M2 H:OUTX L:OUT*X
2 Tray lift motor A PHASE M2 H:OUTX L:OUT*X
1 Tray lift motor B ENABLE M2 H:output L:OFF
0 Tray lift motor A ENABLE M2 H:output L:OFF
P058 7 EEPROM/DA converter Disignal - -
6 Fold transport motor ON/OFF signal M5 H:Absorption
5 - - H:on
4 Fold adjustment regi clutch BACK - H:Absorption
3 Fold adjustment regi clutch FEED - H:Absorption
2 paper set LED - -
1 - - H:ON
0 Interface InsDataEnable signal - -
P059 7 Fold transport motor lock signal - H:lock
6 Delivery sensor S25 H:paper on
5 Upper stopper sensor S16 H:paper on
4 Upper stopper path sensor S22 H:paper on
3 Paper feed motor*B M1 H:active
2 Paper feed motor*A M1 H:active
1 Paper feed motorB M1 H:active
0 Paper feed motorA M1 H:active
P060 7 DSW8 - L:ON
6 DSW4 - L:ON
5 DSW3 - L:ON
4 DSW2 - L:ON
3 Reverse entrance sensor S12 L:paper on
2 DSW1 - L:ON
1 Reverse timing sensor S11 H:paper on
0 Paper registration sensor S4 L:paper on
P061 7 - - -
6 - - -
5 - - -
4 PSW2 - L:ON
3 PSW1 - L:ON
2 Delivery sensor S25 H:paper on
1 Fold position sensor S23 H:paper on
0 Release timing sensor S21 H:paper on
T-8-21