13
Controller PCB to the Reader is not received within
30 seconds.
2. Check the connection
of the Main Controller
PCB (including the flat
cable).
3. Replace the flat
cable.
4. Replace the Main
Controller PCB (PCB2).
E315-
0551
Device abnormal completion
An abnormal signal from the Main Controller PCB
to the Reader is detected.
1. Turn OFF and then
ON the main power.
2. Check the connection
of the Main Controller
PCB (including the flat
cable).
3. Replace the flat
cable.
4. Replace the Main
Controller PCB (PCB2).
E350
System error
Contact the service
company office
E351-
0000
Main Controller PCB communication error
1. Turn OFF and then
ON the main power
2. Disconnect and then
connect the connector
of the Main Controller
PCB.
3. Replace the Main
Controller PCB (PCB2).
E354
System error
Contact the service
company office
E355
System error
Contact the service
company office
E500-
0000
Communication error
As for the communication with the Finisher and the
Host Machine, the retry of the communication was
over the specified number of times.
1. Check the installation
of the Host Machine and
the Finisher.
2. Check the connector
connection between the
DC Controller PCB
(PCB1) and the Finisher
Controller PCB (PCB1).
3. Replace the Finisher
Controller PCB (PCB1).
4. Replace the DC
