Canon imageRUNNER ADVANCE 500i, Список кодов ошибок

Страница: 17 / 30

17
Code
Description Remedy
E613-
0512
Image memory is faulty or insufficient
No necessary memory at Main
Controller PCB
Make a 512MB memory at Main
Controller PCB (PCB2).
E613- Image memory is faulty or insufficient Make a 1024MB memory at Main
was driven for 30mm. Guide Motor (M6).
2. Replace the Tray Auxiliary
Guide HP Sensor (S6).
3. Replace the Tray Auxiliary
Guide Motor (M6).
4. Replace the Finisher
Controller PCB (PCB1).
E583-
0002
Tray Auxiliary Guide Motor (M6) error
The Tray Auxiliary Guide failed to be
detected by the Tray Auxiliary Guide HP
Sensor (S6) although the Tray Auxiliary
Guide Motor (M6) was driven for 1.8 seconds
1. Check the connector
connection of the Tray
Auxiliary Guide HP Sensor
(S6) or the Tray Auxiliary
Guide Motor (M6).
2. Replace the Tray Auxiliary
Guide HP Sensor (S6).
3. Replace the Tray Auxiliary
Guide Motor (M6).
4. Replace the Finisher
Controller PCB (PCB1).
E602 File system error on the HDD
E604-
0512
Image memory is faulty or insufficient
512MB memory needs to be installed
(insufficient memory for the model)
1. Install a 512MB or larger
main memory
E604-
1024
Image memory is faulty or insufficient
1024MB memory needs to be installed
(insufficient memory for the model)
1. Install a 1024MB or larger
main memory
E604-
1536
Image memory is faulty or insufficient
1536MB memory needs to be installed
(insufficient memory for the model)
1. Install a 1536MB or larger
main memory
E611-
0000
An error code to prevent repeated resend
due to power shutdown during FAX
transmission
Repeated rebooting and resending in a short
period of time
1. Clear the FAX job
information.
Execute the following:
COPIER > FUNCTION >
CLEAR > FXTX-CLR
2. Turn OFF and ON the main
power.