9
data failed to match.
(PCB3) and the Main Controller PCB
(PCB2).
2. Replace the Reader Controller PCB
(PCB3).
3. Replace the Main Controller PCB
(PCB2).
E261-
0000
Zero cross signal error
The zero cross signal was not
detected for 500msec or longer while
the relay turned to on.
*When the same status was detected
again after executing an error retry.
1. Check the connector connection. (All
connectors on the DC Controller PCB)
2. Replace the DC Controller PCB
(PCB1).
3. Replace the AC Driver PCB (PCB4).
E315-
0007
Image process device error
JBIG encode error
1. Turn OFF and then ON the main
power.
2. Check connection of Main Controller
PCB.
3. Replace Main Controller PCB
(PCB2).
E315-
000d
Image process device error
JBIG decode error
1. Delete the current job.
2. Turn OFF and then ON the main
power.
3. Check connection of Main Controller
PCB.
4. Replace the DDR-SDRAM, the HDD
and Main Controller PCB (PCB2) at the
same time.
E315-
000e
Image process device error
Error at software decoding
1. Delete the current job.
2. Turn OFF and then ON the main
power.
3. Check connection of Main Controller
PCB.
4. Replace the DDR-SDRAM, the HDD
and Main Controller PCB (PCB2) at the
same time.
E315-
000f
Image process device error
Error at MemoryCopy
1. Turn OFF and then ON the main
power.
2. Check connection of Main Controller
PCB.
3. Replace Main Controller PCB
(PCB2).
E315-
0027
Image process device error
ROTU timeout error
1. Turn OFF and then ON the main
power.
2. Check connection of Main Controller
