Canon imageRUNNER 2545i, Руководство по отправке факсов

Страница: 278 / 321

Identifying and Isolating Problems 9-3
T
roub
le
sh
oot
in
g
9
Cause 2 If you are sending to a file server, the user and password settings are incorrect.
Remedy Check that the user name and password you specified match the user accounts
(user name and password) registered to the computer (file server). (See
Chapter 5, “Setting up Computers to Use Print and Send Functions,” in the
System Settings Guide .)
Cause 3 If you are sending to a file server, the shared folder settings are incorrect.
Remedy Check the shared folder settings. (See Chapter 5, “Setting up Computers to Use
Print and Send Functions,” in the
System Settings Guide .)
Memory i s full.
Cause There is insufficient memory available.
Remedy Delete unwanted documents and documents with errors from memory to
increase the amount of available memory. (See “Checking/Changing the Status
of Documents Received in Memory,” on p. 6-14.)
The document doe s not print clearly on the recipient’ s machine.
Cause The platen glass of your machine is dirty.
Remedy Make a few copies using your machine. If streaks appear on the copies, clean
the platen glass. (See Chapter 5, “Routine Maintenance,” in the
Reference
Guide .)
The den s ity of the document s s ent to a recipient’ s machine i s too
li g ht.
Cause The density setting is set towards ‘Light’ and the original type setting is set to
‘Photo’.
Remedy Change the density setting towards ‘Dark’ and the original type setting to ‘Text’,
and send the document again. (See “Adjusting the Density and Image Quality,”
on p. 3-9.)
The recipient’ s machine i s s low to s witch over to the receivin g mode,
and error s alway s occur.
Cause No pause is not inserted in the fax number.
Remedy If you are sending to a machine that takes time to switch over for fax receiving,
insert a pause after the destination’s fax number.