Sending Methods
3-4
Se
nd
ing F
a
x
e
s
3
3
Specify the destination.
For instructions on specifying the destination, see “Dialing Methods,” on p. 2-2.
4
Press [Start].
If the original is placed on the platen glass, follow the instructions that appear on
the LCD display
➞
press
(Start) once for each original. When scanning is
complete, press [OK].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
To cancel memory sending, press
(Stop). (See “Using the Stop Key,” on
•
You can also cancel a send job using [System Monitor]. (See “Using the System
Monitor Key,” on p. 1-44.)
Direct Sending
Direct Sending enables you to send your document directly to the recipient without
storing it in memory. The machine sends each page of the document to the
destination as it is scanned.
Although Direct Sending is slower than Memory Sending, you can use Direct
Sending when you want to confirm that every page is sent normally, or you need to
send an urgent document ahead of other documents stored in memory.
Start
