Placing Originals
1-35
Bef
o
re Y
o
u
Star
t U
s
ing This Machine
1
NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass (by the
arrow in the top left corner), your original may not be scanned correctly, depending on the
scan and send modes that you have set.
•
If an original is scanned facing the wrong direction, the sender information is not printed
in the correct position on the fax.
•
Originals of the following sizes can be placed either vertically or horizontally. However,
the scanning speed for horizontally placed originals is somewhat slower than vertically
placed originals. Place your originals horizontally when enlarging an LTR original onto
11" × 17" paper.
- Platen glass:
LTR, STMT
- Feeder:
LTR, STMT
•
Horizontally placed LTR and STMT originals are referred to as LTRR and STMTR.
•
11" × 17" and LGL originals must be placed horizontally.
Place the
original
face down.
Place the
original
face down.
Platen Glass
Vertical Placement
Horizontal Placement
ABC
ABC
Place the
original
face up.
Place the
original
face up.
Feeder
Vertical Placement
Horizontal Placement
