Canon imageCLASS MF5850dn, Основное руководство по эксплуатации

Страница: 126 / 302

Reg
ist
er
ing D
estina
tions in the A
ddr
ess B
ook
5-15
Storing/Editing Coded Dial Codes
9
Use – , [numeric keys] and
[Tone] to enter the destination’s name
(16 characters maximum), then press
[OK].
J o h n ( e - m a i l )
N A M E : a
Ex.
To register another coded dial code, repeat the
procedure from step 4.
10
Press [Stop/Reset] to return to the
standby mode.
Registering File Server Addresses
in Coded Dial Codes
This section describes the procedure for registering
file server addresses in the coded dial codes.
If <RESTRICT NEW ADD.> is set to <ON>, you cannot register
new destinations. Make sure that <RESTRICT NEW ADD.> is set
to <OFF>. For details, see “Restricting the New Address,” in the e-
Manual.
1
Press [Menu].
2
Press or to select <ADDRESS
BOOK SET.>, then press [OK].
5 . A D D R E S S B O O K S E T .
M E N U
If a password has been set for the Address Book,
enter the password using – [numeric keys],
then press [OK].
3
Press or to select <CODED SPD
DIAL>, then press [OK].
2 . C O D E D S P D D I A L
A D D R E S S B O O K S E T .
4
Press or to select a coded dial
code (000 to 179) for which you want to
register the address, then press [OK].
[ * 0 0 0 ] N O T R E G I S T E R E D
C O D E D S P D D I A L
You can also select a coded dial code by
pressing [Coded Dial] followed by the desired
three-digit code.
5
Press or to select <SMB>, then
press [OK].
S M B
C O D E D S P D D I A L
6
Press or to select <HOST NAME>,
then press [OK].
1 . H O S T N A M E
C O D E D S P D D I A L
7
Use – , [numeric keys] and
[Tone] to enter the name of the file
server on the network (120 characters
maximum), then press [OK].
s e r v e r 1
H O S T N A M E : 1
Ex.
For information on how to enter characters, see
“Entering Characters,” on p. 1-15.
8
Press or to select <NAME>, then
press [OK].
2 . N A M E
C O D E D S P D D I A L