Canon imageCLASS MF5850dn, Основное руководство по эксплуатации

Страница: 117 / 302

Reg
ist
er
ing D
estina
tions in the A
ddr
ess B
ook
5-6
Storing/Editing One-Touch Keys
Registering File Server Addresses
in One-Touch Keys
This section describes the procedure for registering
file server addresses in the one-touch keys.
You can also register file server addresses in the one-touch
keys using the Send Function Setting Tool. For details, see “Use
Send Function Setting Tool,” in the e-Manual.
If <RESTRICT NEW ADD.> is set to <ON>, you cannot register
new destinations. Make sure that <RESTRICT NEW ADD.> is set
to <OFF>. For details, see “Restricting the New Address,” in the
e-Manual.
1
Press [Menu].
2
Press or to select <ADDRESS
BOOK SET.>, then press [OK].
5 . A D D R E S S B O O K S E T .
M E N U
If a password has been set for the Address Book,
enter the password using – [numeric keys],
then press [OK].
3
Press or to select <1-TOUCH SPD
DIAL>, then press [OK].
1 . 1 - T O U C H S P D D I A L
A D D R E S S B O O K S E T .
4
Press or to select a one-touch key
(01 to 20) for which you want to register
the address, then press [OK].
[ 0 1 ] N O T R E G I S T E R E D
1 - T O U C H S P D D I A L
You can also select a one-touch key by pressing
the corresponding one-touch key.
5
Press or to select <SMB>, then
press [OK].
S M B
1 - T O U C H S P D D I A L
–
–
6
Press or to select <HOST NAME>,
then press [OK].
1 . H O S T N A M E
1 - T O U C H S P D D I A L
7
Use – , [numeric keys] and
[Tone] to enter the name of the file
server on the network (120 characters
maximum), then press [OK].
s e r v e r 1
H O S T N A M E : 1
Ex.
For information on how to enter characters, see
“Entering Characters,” on p. 1-15.
8
Press or to select <NAME>, then
press [OK].
2 . N A M E
1 - T O U C H S P D D I A L
9
Use – , [numeric keys] and
[Tone] to enter the destination’s name
(16 characters maximum), then press
[OK].
S E R V E R 1
N A M E : 1
Ex.
10
Press or to select <FILE PATH>,
then press [OK].
3 . F I L E P A T H
1 - T O U C H S P D D I A L