Canon imageCLASS MF5850dn, Основное руководство по эксплуатации

Страница: 115 / 302

Reg
ist
er
ing D
estina
tions in the A
ddr
ess B
ook
5-4
Storing/Editing One-Touch Keys
9
Use – , [numeric keys] and
[Tone] to enter the destination’s name
(16 characters maximum), then press
[OK].
J o h n
N A M E : a
Ex.
If you want to specify the following optional
settings (<LONG DISTANCE>, <TX SPEED>,
and <ECM>) for the fax number you are
registering, go to the next step.
If you do not need to set these options, skip
to step 18.
For information on how to enter characters, see
“Entering Characters,” on p. 1-15.
10
Press or to select <OPTIONAL
SETTING>, then press [OK].
3 . O P T I O N A L S E T T I N G
1 - T O U C H S P D D I A L
11
Press or to select <ON>, then
press [OK].
O N
O P T I O N A L S E T T I N G
12
Press or to select <LONG
DISTANCE>, then press [OK].
1 . L O N G D I S T A N C E
O P T I O N A L S E T T I N G
13
Press or to select the most
effective transmission option, then press
[OK].
D O M E S T I C
L O N G D I S T A N C E
–
–
<DOMESTIC>: Normally select this option.
<LONG DISTANCE 1-3>: Select one of these
options when you make an international call.
If errors occur during fax transmissions, try the
setting from <LONG DISTANCE 1> through
<LONG DISTANCE 3>.
14
Press or to select <TX SPEED>,
then press [OK].
2 . T X S P E E D
O P T I O N A L S E T T I N G
15
Press or to select the sending
speed (33600bps, 14400bps, 9600bps, or
4800bps), then press [OK].
3 3 6 0 0 b p s
T X S P E E D
If transmission errors occur frequently, lower the
speed.
16
Press or to select <ECM>, then
press [OK].
3 . E C M
O P T I O N A L S E T T I N G
17
Press or to select <ON> to reduce
system and line errors while sending to or
receiving from other machines that
support ECM, then press [OK].
O N
E C M
To register another one-touch key, repeat the
procedure from step 4.
18
Press [Stop/Reset] to return to the
standby mode.
–
–