Canon EOS R Скачать руководство пользователя страница 524

Страница: 524 / 644

524

Responding to Error Messages

65: Wireless LAN connection lost

Are any obstacles blocking the line of sight between the

camera and the antenna of the access point?

Move the antenna of the access point to a position clearly visible

from the point of view of the camera (p.528).

The Wi-Fi connection was lost for some reason, and the

connection cannot be restored.

The following are possible reasons: excessive access to the

access point from another device, a microwave oven or similar

appliance in use nearby (interfering with IEEE 802.11b/g/n (2.4

GHz band)), or influence of rain or high humidity (p.528).

66: Incorrect wireless LAN password

Are the camera and the access point set to use the same

password for authentication?

The setting is case-sensitive, so check upper- and lower-case

characters. Make sure that the correct password for authentication

is set on the camera (p.506).

67: Incorrect wireless LAN encryption method

Are the camera and the access point set to use the same

encryption method?

The camera supports the following encryption methods: WEP,

TKIP, and AES (p.496).

If filtering by MAC address is active, is the MAC address of

the camera in use registered at the access point?

point. The MAC address can be checked on the

[View info]

screen (p.516).

Содержание EOS R





































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание EOS R

Отзывы:

Бренды по названию

Популярные бренды

Canon EOS R, Руководство для продвинутых пользователей

Результаты поиска

Содержание EOS R

Отзывы:

Бренды по названию

Популярные бренды