Canon EOS R, Руководство для продвинутых пользователей

Страница: 133 / 644

133
Program AE
o
If the “ 30" ” shutter speed and the lowest f/number
blink, it indicates underexposure.
Increase the ISO speed or use flash.
o
If the “ 1/8000 ” shutter speed and the highest f/number
blink, it indicates overexposure.
Lower the ISO speed or use an ND filter (sold
separately) to reduce the amount of light entering the
lens.
Differences Between [
d
] and [
A
] Modes
o
In [
A
] mode, many functions, such as the AF operation and metering
mode, are set automatically to prevent spoiled shots. The functions you
can set are limited. On the other hand, with [
d
] mode, only the shutter
speed and aperture are set automatically. You can freely set the AF
operation, metering mode, and other functions.
Program Shift
o
In [
d
] mode, you can freely change the shutter speed and aperture
combination (Program) set automatically by the camera while
maintaining the same exposure. This is called Program shift.
o
To shift the program, press the shutter button halfway, then turn the
<
6
> dial until the desired shutter speed or aperture is displayed.
o
Program shift will be canceled automatically when the metering timer
ends (exposure setting display turns off).
o
Program shift cannot be used with flash.