Canon EOS R, Руководство для продвинутых пользователей

Страница: 171 / 644

171
Multiple Exposures
Merging Multiple Exposures with an Image Recorded on the Card
You can select a RAW image recorded on the card as the first single
exposure. The image data of the selected RAW image will remain intact.
Only
1
or
F
images can be used.
JPEG images cannot be
selected. Images you can specify also vary depending on the lens
attached. For details, see the table below.
1
Select [Select image for multi. expo.].
2
Select the first image.
z
Press the <
Y
> <
Z
> keys to select
the image to be used as the first
single exposure, then press <
0
>.
z
Select [OK] .
g
T he file number of the selected image will
be displayed at the bottom of the screen.
3
Take the picture.
z
When you select the first image,
the number of remaining exposures
as set with [No. of exposures] will
decrease by 1.
z
Images You Can Select
Lens Attached Cropped Shooting Selectable Images
RF/
EF lens
Off RAW images captured at full size
On RAW images from cropped shooting or
taken with an EF-S lens
EF-S lens –
o
These images cannot be selected as the first single exposure: Images
captured with [
z
3: Highlight tone priority] set to [Enable] or
[Enhanced] , or images captured with [
z
1:
z
Cropping/aspect ratio]
not set to [Full-frame] or [1.6x (crop)] .
o
[Disable] is applied for [
z
2: Lens aberration correction] and [
z
3:
Auto Lighting Optimizer] regardless of the settings of the image
selected as the first single exposure.