Canon EOS R Скачать руководство пользователя страница 193

Страница: 193 / 644

193

Setting the Movie Recording Quality

If you change the

[

3: Video system]

setting, also set

[

1: Movie rec

quality]

again.

Normal playback of 4K,

, and High Frame Rate movies,

for example, may not be possible on other devices, because playback is

processing-intensive.

Sharpness and noise vary slightly depending on movie recording quality,

cropped shooting settings, and the lens used.

To obtain better performance with the card, formatting the card with the

camera before shooting movies is recommended (p.373).

Frame rate options on the screen for movie recording size vary

depending on whether

[

3: Video system]

is set to

[For NTSC]

[For

PAL]

Movies cannot be recorded in VGA quality.

4K Movie Shooting

Shooting 4K movies requires a high-performance card. For details,

see “Cards that Can Record Movies” on page 611.

Shooting 4K movies or High Frame Rate movies greatly increases

the processing load, which may cause the camera’s internal

temperature to increase faster or become higher than for regular

movies.

If a red

icon appears during movie shooting, the card may

be hot, so stop shooting the movie and let the camera cool down

before removing the card. (Do not remove the card immediately.)

From a 4K movie, you can select any frame to save as an approx.

8.3-megapixel (3840×2160) JPEG still image to the card (p.329).

Содержание EOS R





































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание EOS R

Отзывы:

Бренды по названию

Популярные бренды

Canon EOS R, Руководство для продвинутых пользователей

Результаты поиска

Содержание EOS R

Отзывы:

Бренды по названию

Популярные бренды