Canon EOS R, Руководство для продвинутых пользователей

Страница: 496 / 644

496
Wi-Fi Connection via Access Points
This section describes how to join a Wi-Fi network via an access point.
Checking the Type of Access Point
Determine whether the access point for the Wi-Fi connection is
compatible with WPS (Wi-Fi Protected Setup), as described in the
access point instruction manual or other documentation.
z
When WPS is supported
The following two Wi-Fi connection methods are available.
Connection can be established easier with WPS (PBC mode).
WPS (PBC mode):
Follow the steps beginning on page 497.
WPS (PIN mode):
Follow the steps beginning on page 501.
z
When WPS is not supported
Follow the steps beginning on page 504. In this case, access point
encryption must be set to one of the following.
[Authentication]:
Open system, Shared key, or WPA/WPA2-PSK
[Encryption settings]:
WEP, TKIP, or AES
o
If stealth functions of the access point are active, Wi-Fi connection
may be disabled. Deactivate stealth functions.
o
When connecting to a network that has a network administrator, ask the
administrator about the detailed setting procedures.
If the network you use filters by MAC address, register the MAC address of
the camera at the access point. The MAC address can be checked on the
[View info] screen (p.516).