6
Safety Warnings and Precautions
●
To avoid a fire hazard, occasionally disconnect the power cord from the printer and
the power supply and use a soft dry cloth to clean the cord connectors and the
connection points. Leaving the cord plugged in and not cleaned for a long period,
especially in an area subject to dust, oil, and high humidity, could cause the
insulation material to deteriorate.
●
To avoid damaging the power plug, which could cause a short circuit and cause a
fire or electrical shock, never pull on the power cord to unplug the cord from the
power supply. Always grip the plug to remove it from the power supply.
●
If the printer will not be used for a long period, for your safety disconnect the power
cord from the power source.
●
Always keep the area around the power plug free of obstacles so you can unplug it
easily. This allows you to unplug the power cord quickly in an emergency.
●
Never use any power source other than the one rated for the printer. Also, make
sure that the power source can supply sufficient power for the printer. This could
cause a fire or serious electrical shock, or damage the printer.
Supply Voltage: AC 220 – 240 V, 50/60 Hz
Power Consumption: 120 W (max.), Sleep Mode 9 W
●
Switch the printer off after it has stopped operating and entered the sleep mode.
●
Do not rapidly switch the printer off and on. This could damage the printer. After
switching the printer off, wait at least 5 seconds before you switch it on again.
Caution
Important
