5
5
5-45
5-45
Adjustment > Adjustment at Time of Parts Replacement > Saddle Stitch/Fold Placement Adjustment > Saddle stitch adjustment
Adjustment > Adjustment at Time of Parts Replacement > Saddle Stitch/Fold Placement Adjustment > Saddle stitch adjustment
3) Set DIP SW382 [1] on the switch PCB as shown in the figure below.
Then, press SW385 once so that the adjustment is ready now.
SW382
SW381
SW383
(-)
(+)
ENTER
SW384 SW385
DSP381
[1]
4) Work with the 2 push switches (SW383, 384) by calculating correction value from the
measured value.
Pressing SW383 [1] moves the folding position [2] upward while pressing SW384 [2] moves
the folding position [2] downward.
• Adjustment range: +16 to -16 (correction amount per unit: 0.125mm)
SW382
SW381
SW383
(-)
(+)
ENTER
SW384 SW385
DSP381
[1]
[3]
[2]
5) Press push switch SW385 once to complete the adjustment mode.
F-5-99
F-5-100
■
Saddle stitch adjustment
NOTE:
In saddle stitch adjustment, the saddle stitch position and the fold placement are shifted
at the same time. By adjusting the saddle stitch position, the fold placement is also
shifted to the center at the same time.
●
Preparation
1) Turn ON the power of the finisher.
2) Turn ON the power of the host machine to be on to be on standby.
3) Open the front cover and put the door switch tool into the door switch.
4) Remove the switch cover.
NOTE:
Refer to "Preparations 5-6" for details of step 1) to 4).
●
Procedure
1) Set DIP SW382 [1] on the switch PCB as shown in the figure below.
• In the case of A-configuration [2]
• In the case of L-configuration [3]
Then, press SW385 so that the adjustment is ready now.
SW382
SW381
SW383
(-)
(+)
ENTER
SW384 SW385
DSP381
[1]
[3]
[2]
F-5-101
Содержание Booklet Finisher-D1
