Canon Booklet Finisher-D1, Руководство по обслуживанию

Страница: 178 / 370

5
5
5-2
5-2
Adjustment > Basic Adjustment > Outline
Adjustment > Basic Adjustment > Outline
Basic Adjustment
Outline
CAUTION: Setting the Dip Switch
If setting the Dip Switch, the Delivery Tray setting on the host machine side returns to
the default.
After setting the Dip Switch, it is necessary to execute the Delivery Tray setting on the
host machine side again.
Except for some items, the adjustment and setting can input from the both devices of the host
machine (service mode) and the finisher (Dip switch).
The input value is memorized in the EEPROM of finisher controller. Regardless of the input
device (host machine or finisher), the setting range and unit are same, and the final input
value is effective.
Item
Bit setting of DSW1
in the finisher
controller PCB
Service mode Range Default Reference
Bufferless Mode ON:1, 3, 8 SORTER> OPTION
>BUFFSW
0 to 4 0 p. 5-54
Adjustment in the Case
of Failure in Stacking
Performance of Tray
(upper curl)
ON:1, 3, 6, 7 SORTER>OPTION
>CURLSW
0 to 2 0 p. 5-55
Adjustment in the Case
of Failure in Stacking
Performance of Tray
(lower curl)
ON:1, 3, 6, 7 SORTER>OPTION
>CURLSW
0 to 2 0 p. 5-57
Adjustment in the Case
of Failure in Stacking
Performance of Tray
(runon of paper when
using thin paper)
ON:1, 3, 7 SORTER>OPTION
>TRYEJCT
0 to 1 0 p. 5-59
Adjustment in the Case
of Canceling Limit for
Tray Stack
ON:1, 3, 5 SORTER>OPTION
>TRYOVER
0 to 1 0 p. 5-61
Setting of Pressless
Mode
ON:1, 3, 4 SORTER>OPTION
>SDLPRS
0 to 3 0 p. 5-120
T-5-1
At the occurrence of the following symptoms or at adjustment timing, perform the appropriate
adjustment.
Adjustment Type Symptom, adjustment timing Reference
Height Adjustment Jam with this equipment p. 5-3
Side Registration/Skew
Adjustment
Shaky vibration on this equipment (due to large
operating level of the side registration unit) or large
skew
p. 5-6
Adjusting Sensor Light
Intensity
When installing the Finisher or replacing a sensor p. 5-10
T-5-2