Candela AlexTriVantage, Руководство оператора

Страница: 57 / 116

8501-00-1800, Revision 05 Confidential 2-27
Candela Corporation AlexTriVantage Laser System
Spot Size Identifier Bar
A bar on the bottom left side of the main screen identifies the spot size selected, based on
the Handpiece that has been connected to the Deliver System cable. The selected Spot Size
is highlighted in blue on the Spot Size Identifier Bar (see
Figure 2-21 )
Figure 2-21: Spot Size Identifier Bar
Pulse Rate Control
The Pulse Rate controls the number of times the laser will pulse each time the Footswitch is
depressed.
To set the Pulse Rate, select the Rate button (see Figure 2-22 ). You can select Single or a
number between 1 and 5. The number of pulses selected is indicated with blue highlighting
on the bars on the on the Pulse Rate button.
In Single Pulse mode, the laser will pulse once for each depression of the Footswitch. If you
select a number between 1 and 5, the laser will pulse the selected number of times for each
depression of the Footswitch. For example, if you press 3, the laser will pulse three times for
each depression of the Footswitch, while if you press 4, the laser will pulse four time for each
Footswitch depression.
Figure 2-22: Pulse Rate Control
Pulse Count and Pulse Count Reset Button
The Treatment Pulse Counter parameter indicates the number of times the laser has been
pulsed during a treatment session. The number of pules delivered displays beside the Pulse
Count Reset button (see
Figure 2-23 ). In this example, no pulses have been delivered.
Figure 2-23: Pulse Count and Reset Button
The Pulse Count is automatically reset to zero at system startup (when the Keylock Switch is
turned on). The Pulse Count can also be reset to zero by pressing and holding the Reset
button for at least two seconds. The system responds by setting the Pulse Count value
displayed back to zero.