Candela AlexTriVantage, Руководство оператора

Страница: 39 / 116

8501-00-1800, Revision 05 Confidential 2-9
Candela Corporation AlexTriVantage Laser System
Calibration Port
The Calibration Port (sometimes referred to as the Cal Port) is used to measure the laser
output energy. The Handpiece on the Distal end of the Delivery System cable is inserted into
the Calibration Port to start this procedure. You also insert the Handpiece into the Calibration
Port when the treatment is complete.
The Handpiece must be clean and dry before being placed in the Calibration Port.
For more information on the Handpiece, see “Delivery System” on page 2-12 .
Delivery System Receptacle
This receptacle is used to connect the Delivery System Cable to the laser system. The
Proximal end of the Delivery System cable is connected to this receptacle. This is a keyed
receptacle so that the Delivery System cable cannot be installed incorrectly.
For more information on the Delivery System cable, see “Delivery System” on page 2-
12 .
Locking Wheels
The AlexTriVantage system is equipped with wheels. The two front wheels can swivel to
allow for maneuverability. The rear wheels are fixed and do not swivel.
The front wheels provide a locking mechanism which prevent the wheels from swiveling or
moving.
To lock the front wheels, use your foot to press down on the locking On level
(see Figure 2-5 ).
Figure 2-5: Front Wheel Locks
To release the wheel lock, either press on the Off level or put your foot under the On
level and press up.
Caution: Before inserting the Handpiece into the calibration port, ensure that the
distance gauge is removed and the Handpiece is clean.