Rev 1.0
67
Figure 77: Math Channel
One decimal place is sufficient as a resolution here. Accordingly, a
resolution
of 0.1 is chosen. As in
the
TRI Editor
, the
decimal separator is a period and not a comma
!
From the drop-down menu, select the most suitable calculation template, assign the variable and
fixed values and click on the
write
to display button to transfer the newly created
Math Channel
to
your data display. In order to use the
Math Channel
as output, it must be created as an
internal
sensor
in the
TRI editor
.
9.5.10
Boost/PWM Control
In this menu the
paid
item
Boost/PWM Control
Addon can be configured. Although this function can
also be configured in DSS without purchasing a license, it only becomes active when the license key is
entered on the data display.
The (PWM) output can be controlled via the previously created
User Table
(
Assign Usertable
). The
frequency (
Output Frequency
) and the PWM signal (
PMW output
) can be defined. Furthermore, the
output can be inverted with the invert function.
Содержание MFD28 Gen2
Страница 1: ...MFD28 32 Gen2 Manual...
