CAN CHECKED MFD28 Gen2, Руководство пользователя

Страница: 53 / 75

Rev 1.0
53
9.3.2.15 Overlay
With the overlay widget you can display flashing warnings regardless of the min and maximum
warning values stored in the TRI/TRX file . You can freely configure the flashing frequency and color.
The overlay widget can be found by default for various purposes (warning, shiftlight) on the following
pages:
•
DailyDash
•
TrackView
•
AirflowLogging
In the following figure, the overlay widget is used as a shiftlight. In this case, it is fixed to the sensor
speed and starts flashing at a frequency of 60 Hz as soon as the warning threshold (6000 rpm) is
exceeded.
Figure 55: overlay widget in both states on the TrackView
Depending on which sensor you assign to the widget , it can be used as a switching flash, as a warning
or as a confirmation. Like the other widgets before, you can change it in size (x/y size) and position
( x/y coord). In addition, you can choose between the round or the square shape ( rectangle, circle ).
Also adjustable is the frequency ( time ms (x10 )) and the color ( colour ) with which the widget should
flash. The point value describes the activation limit. If the current value of the sensor is greater than
the value in value , the widget becomes active and flashes.
Figure 56: Configuration overlay