CAN CHECKED MFD28 Gen2, Руководство пользователя

Страница: 16 / 75

Rev 1.0
16
5.6 Splash Screen
The splash screen is the start image/animation of your data display. In this menu you can set whether
and for how long the splash screen should be displayed when your data display is switched on. By
tapping the number, you can switch between off and a time of one to ten seconds.
5.7 Start Page
Under Start Page you can set on which page your display should be after starting. Here you have the
choice between sides one to ten or last used . With this option, your display starts on the side that
was active when the data display was switched off. Switching between the different options is
analogous to switching the
splash screen by clicking on it.
5.8 Shiftlight
In the submenu Shiftlight you can configure the behavior of your external shift flash. Here you can
set the color and the activation speed threshold for each of the eight switching flash LEDs by tapping
them.
Furthermore, you can set the speed threshold ( RPM flash ), at which all eight LEDs start flashing.
Other menu items are the global brightness of the LEDs ( brightness ) and the direction of the gradient
( left2right or right2left ).
5.9 Dim Sensivity
Under this submenu you can adjust the amount of dimming of your display via the essential function
Dim Display 5.3
ATTENTION : At 100%, the display is almost unreadable.
5.10 Pages
In the submenu Pages you will find a tab for predefined widgets pack s. If you have stored them on
your SD card, you can select and activate them here.
For each page on your data display, you'll also find two sliders here.
Figure 12: Pages
The left slider locks or unlocks ("editable") the pages for editing. By default, editing is locked.
The right slider enables ("enabled") or hidden pages . With this function, for example, your display
can only have three pages (page 4-10 hidden) and jumps back to the first page after the third page .