Campingaz 400 SG, Инструкция по эксплуатации

Страница: 17 / 193

Check for gas leaks following the
instructions in paragraph
Belgium, Luxembourg, United
Kingdom, Ireland, Portugal, Spain, Italy,
Croatia, Greece, Netherlands, Czech
Republic, Slovakia, Hungary, Slovenia,
Norway, Sweden, Denmark,
Bulgaria, Turkey, Romania, Poland:
The barbecue is equipped with a circular
connector. It should be used with flexible
hose that is suitable for use with butane
and propane gas. Hose length should not
exceed 1.20 metre. It should be replaced if
it is damaged or cracked, when required
by national regulations or at the end of the
part lifecycle. Do not pull or pierce the
hose.
Keep away from any parts of the barbecue
that get hot. Check that the flexible hose
stretches out normally, without twistin
pulling.
Check for gas leaks following the
instructions in paragraph D.
Switzerland, Germany, Austria:
The barbecue should be used with flexible
tubing that is suitable for use with butane
and propane gas. Hose length should not
exceed 1.50 metre. It
it is damaged or cracked, when required
by national regulations or at the end of the
part lifecycle. Do not pull or pierce the
tubing. Keep away from any parts of the
barbecue that get hot. Check that the
flexible hose stretches out
without twisting or pulling.
Flexible tubing connection
tubing to the connector on the barbecue,
tighten the nut on the tubing firmly but
without excess force using the two
wrenches provided:
•
no. 10 wrench to tighten the connect
•
no. 17 wrench to tighten the nut on the
tubing
Check for gas leaks following the
instructions in paragraph E.
Belgium, Luxembourg, United
Kingdom, Ireland, Portugal, Spain, Italy,
Croatia, Greece, Netherlands, Czech
Republic, Slovakia, Hungary, Slovenia,
Norway, Sweden, Denmark, Finland,
Bulgaria, Turkey, Romania, Poland:
The barbecue is equipped with a circular
connector. It should be used with flexible
hose that is suitable for use with butane
and propane gas. Hose length should not
exceed 1.20 metre. It should be replaced if
t is damaged or cracked, when required
by national regulations or at the end of the
part lifecycle. Do not pull or pierce the
Keep away from any parts of the barbecue
that get hot. Check that the flexible hose
stretches out normally, without twistin
Check for gas leaks following the
instructions in paragraph D.
Switzerland, Germany, Austria:
The barbecue should be used with flexible
tubing that is suitable for use with butane
and propane gas. Hose length should not
exceed 1.50 metre. It should be replaced if
it is damaged or cracked, when required
by national regulations or at the end of the
part lifecycle. Do not pull or pierce the
tubing. Keep away from any parts of the
barbecue that get hot. Check that the
flexible hose stretches out normally,
without twisting or pulling.
Flexible tubing connection: to connect the
tubing to the connector on the barbecue,
tighten the nut on the tubing firmly but
without excess force using the two
wrenches provided:
no. 10 wrench to tighten the connect
no. 17 wrench to tighten the nut on the
-17-
Check for gas leaks following the
Belgium, Luxembourg, United
Kingdom, Ireland, Portugal, Spain, Italy,
Croatia, Greece, Netherlands, Czech
Republic, Slovakia, Hungary, Slovenia,
Finland,
Bulgaria, Turkey, Romania, Poland:
The barbecue is equipped with a circular
connector. It should be used with flexible
hose that is suitable for use with butane
and propane gas. Hose length should not
exceed 1.20 metre. It should be replaced if
t is damaged or cracked, when required
by national regulations or at the end of the
part lifecycle. Do not pull or pierce the
Keep away from any parts of the barbecue
that get hot. Check that the flexible hose
stretches out normally, without twisting or
Check for gas leaks following the
The barbecue should be used with flexible
tubing that is suitable for use with butane
and propane gas. Hose length should not
should be replaced if
it is damaged or cracked, when required
by national regulations or at the end of the
part lifecycle. Do not pull or pierce the
tubing. Keep away from any parts of the
barbecue that get hot. Check that the
normally,
: to connect the
tubing to the connector on the barbecue,
tighten the nut on the tubing firmly but
without excess force using the two
no. 10 wrench to tighten the connector
no. 17 wrench to tighten the nut on the
Connect the other end to the regulator
outlet union.
Check for gas leaks following the
instructions in paragraph
E
-
-
-
-
-
-
-
Gas leaks
Do not check for leaks using a flame. Use a
gas leak detecting liquid
- Apply gas leak detecting liquid to the
cylinder/relief valve/pipe/stove unions.
Connect the other end to the regulator
outlet union.
Check for gas leaks following the
instructions in paragraph
E - CONNECTING THE GAS
CYLINDER
If replacing an empty cylinder, read
Section G): «Removing or changing the
gas cylinder».
When installing or removing a gas
cylinder, always operate in an open, well
ventilated place, never in the presence of
a flame, spark or any other source of heat
(cigarette, electrical appliance, etc.), and
away from other persons or inflammable
materials.
-
Position the gas cylinder on the ground,
behind or beside the appliance.
- Important: never store the gas cylinder
on the shelves (textile or metal).
- Close the regulator or gas cylinder valve.
- Screw or click the regulator onto the
cylinder or onto the gas cylinder valve.
- Close the stove valves by turning the
knobs clockwise, position (
- Check that the tubing lies normally,
without twisting or stress.
- Check that the burner tube air holes at
the injector are not obstructed by dust or
spider's webs.
Gas leaks
Do not check for leaks using a flame. Use a
gas leak detecting liquid
Apply gas leak detecting liquid to the
cylinder/relief valve/pipe/stove unions.
10
Connect the other end to the regulator
Check for gas leaks following the
instructions in paragraph E.
CONNECTING THE GAS
CYLINDER
If replacing an empty cylinder, read
«Removing or changing the
When installing or removing a gas
cylinder, always operate in an open, well
ventilated place, never in the presence of
a flame, spark or any other source of heat
(cigarette, electrical appliance, etc.), and
m other persons or inflammable
Position the gas cylinder on the ground,
behind or beside the appliance.
never store the gas cylinder
on the shelves (textile or metal).
Close the regulator or gas cylinder valve.
the regulator onto the
cylinder or onto the gas cylinder valve.
Close the stove valves by turning the
knobs clockwise, position (
).
Check that the tubing lies normally,
without twisting or stress.
Check that the burner tube air holes at
r are not obstructed by dust or
Do not check for leaks using a flame. Use a
gas leak detecting liquid.
Apply gas leak detecting liquid to the
cylinder/relief valve/pipe/stove unions.
Connect the other end to the regulator
Check for gas leaks following the
CONNECTING THE GAS
If replacing an empty cylinder, read
«Removing or changing the
When installing or removing a gas
cylinder, always operate in an open, well-
ventilated place, never in the presence of
a flame, spark or any other source of heat
(cigarette, electrical appliance, etc.), and
m other persons or inflammable
Position the gas cylinder on the ground,
never store the gas cylinder
Close the regulator or gas cylinder valve.
the regulator onto the
cylinder or onto the gas cylinder valve.
Close the stove valves by turning the
Check that the tubing lies normally,
Check that the burner tube air holes at
r are not obstructed by dust or
Do not check for leaks using a flame. Use a
Apply gas leak detecting liquid to the
GB