Campbell CCFC, Руководство по эксплуатации продукта

Страница: 55 / 144

Table 14-6: Timed Capture variables for videos
Variable
Allowable
Values
Description
Send via
FTP
Toggle Enable to initiate sending videos via FTP.
Destination
Drop down to select a configured FTP profile. Use the Edit button to
setup FTP profiles via the FTP Settings modal (
FTP (p. 85)).
Send via
PakBus®
Toggle
Enabling initiates sending videos via the PakBus® modal ( PakBus®
(p. 89)).
PakBus® Port
Displays current PakBus® Port number. Use the Edit button to edit
current PakBus® settings via the PakBus® modal (
PakBus® (p. 89)).
14.5.2 External Trigger
NOTE:
This section applies to use with a data logger or other applicable trigger source.
External Trigger is used to configure the camera to capture photos or video using an external
signal that is applied to the External Trigger input line. In order to activate the External Trigger
capture, refer to the wiring
Table 9-1 (p. 21) for information on which wires need to be connected.
FIGURE 14-10. External Trigger
External Trigger can be configured to Active High or Active Low. When set to Active High, 0 volts
is the Inactive state and a positive voltage is the Active state.
CCFC Field Camera 49