Campbell CCFC, Руководство по эксплуатации продукта

Страница: 35 / 144

13. Connecting to the web
interface
The CCFC supports an automatic IP address configuration when the camera is directly
connected, using an Ethernet cable, to a computer. If using this method, type the IP address,
169.254.99.99, into the Internet browser.
Refer to Setup using Ethernet (p. 29) for details on making the initial network connection to the
camera. To establish communications with the camera, use one of the methods previously
discussed. Type the appropriate IP address in the address bar of the browser. After typing the
address, the homepage (Dashboard) of the CCFC camera will appear as shown in
FIGURE 14-1 (p.
34).
The camera ships with automatic network configuration using DHCP enabled. Campbell Scientific
recommends keeping track of changes made to the network settings.
13.1 Setup using Wi-Fi
The CCFC is Wi-Fi enabled. While the camera is powering up, start the computer/mobile device
and connect to the camera using its Wi-Fi network. The camera will appear as CCFC-
nnnn (where
nnnn is the last four digits of the camera serial number) on the Wi-Fi network.
Once connected to the camera Wi-Fi, open a web browser and type the default Wi-Fi IP address
in the address bar: http://10.0.0.1. This directs you to the camera web interface where the camera
can be configured.
13.2 Setup using Ethernet
13.2.1 Link local IP address auto-configuration
The CCFC supports an automatic IP address configuration when the camera is directly
connected, using an Ethernet cable, to a computer without the need of a DHCP server.
This feature is automatically enabled in the camera and is transparent to its normal operation. In
this situation, the camera is accessible using the IP address 169.254.99.99. This address is valid for
accessing the camera in any network configuration.
CCFC Field Camera 29