Campbell CCFC, Руководство по эксплуатации продукта

Страница: 18 / 144

c. Motion Detect – Enable and configure Motion Detect capture. To set this up using
the web interface, see Motion Detect (p. 55).
2. Select the Power Mode that best suits the requirements (see Table 6-1 (p. 12)). Options are:
a. Fully On – Used if no power constraints exist or if high performance is required.
b. Partially On – Provides substantial reduction in power (especially with the Ethernet
Power Mode set to Full Power Save).
c. Deep Sleep – Provides very good power savings. The camera does not need to
reboot when activated by a trigger. Recommended for use if more than 24 triggers
are expected per day.
d. Off Mode – Offers the best power savings. Useful, if less than 24 photos or video
captures are required per day. It takes about 90 seconds for the camera to wake up
to start acquiring a picture.
Table 6-1: Power mode summary
1
Power mode
Ethernet
power save
mode
Quiescent
current draw
max. @ 12 VDC
Time (seconds) from
wakeup to start of
capture
Time (seconds) in fully
on mode (active
current draw)
Fully On
Always on 250 mA < 1 0 (always active)
Full power
save mode
200 mA < 1 0 (always active)
Partially On
Always on 90 mA 10 20
Full power
save mode
10 mA 10 20
Deep Sleep
Always on 6 mA 15 25
Full power
save mode
6 mA 15 25
Off State
Always on 1 mA 90 120
Full power
save mode
1 mA 90 120
1
This table takes into account the camera power settings. It does not include the power draws associated with
activating the IR LEDs (refer to IR LED power control (p. 99)) or Lens Defroster Control (p. 101)).
CCFC Field Camera 12