Campbell CCFC, Руководство по эксплуатации продукта

Страница: 10 / 144

Table 4-1: Quick set up guide – connecting the CCFC using Wi-Fi
Step Procedure
6
Once connected to the camera Wi-Fi, open a web browser and type http://10.0.0.1
in the address bar.
7
This opens the camera web interface where the camera can be configured. The
set up progress bar indicates the steps to setup capture events and get started
using the CCFC.
4.2 Connect your camera using Ethernet
cable
Complete steps 1 through 4 from Table 4-1 (p. 3), then:
Table 4-2: Quick set up guide – connecting the CCFC using Ethernet cable
Step Procedure
5 Take the protective cap off the camera Ethernet connection port.
6
Plug an Ethernet cable into the camera and into a computer. Be sure Wi-Fi is
turned off on the computer.
NOTE:
Ensure the Ethernet port on the computer is configured for DHCP (that is,
does not have a static TCP/IP address). Also, there should be a single Ethernet
cable between the data logger and the computer (no hubs, switches, and so
forth).
7 Open an internet browser and type http://169.254.99.99/ in the address bar.
8
This opens the camera web interface where the camera can be configured. The
set up progress bar indicates the next steps to setup capture events and get
started using the CCFC.
4.3 Quick set up to take an image every 15
minutes
Do the following to set up the CCFC to take an image every 15 minutes and save the photo to
CCFC camera memory.
CCFC Field Camera 4