Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 419 / 649

Chapter 3: Operation System information
Page
3-19
Board Type This field indicates the series of hardware.
Product Type This indicates model of the device.
Software Version This field indicates the system release, the time and date of the release. If
you request technical support, provide the information from this field.
CPU Usage This field indicates the current CPU utilization of the device.
Board MSN This field indicates the Manufacture’s Serial number. A unique serial number
assigned to each radio at the factory for inventory and quality control.
Board Model This field indicates the Manufacturer’s Model number.
FPGA Version This field indicates the version of the field-programmable gate array (FPGA)
on the module. When you request technical support, provide the information
from this field.
Uptime This field indicates how long the module has operated since power was
applied.
System Time This field provides the current time. Any BHS that registers to a BHM inherits
the system time, which is displayed in this field as GMT (Greenwich Mean
Time).
Ethernet Interface This field indicates the speed and duplex state of Ethernet interface to the
BHM.
Antenna Type The current antenna type that has been selected.
Temperature The current operating temperature of the board.
Session Status This field displays the following information about the current session:
Scanning indicates that this BHS currently cycles through the radio
frequencies that are selected in the Radio tab of the Configuration page.
Syncing indicates that this BHM currently attempts to receive sync.
Registering indicates that this BHM has sent a registration request message
to the BHM and has not yet received a response.
Registered indicates that this BHM is both:
• Registered to a BHM.
• Ready to transmit and receive data packets.
Session Uptime This field displays the duration of the current link. The syntax of the
displayed time is
hh:mm:ss .
Registered Backhaul Displays the MAC address and site name of the BHM to which the BHS is
registered to. This parameter provides click-through proxy access to the
BHM’s management interface.
Channel Frequency This field lists the current operating frequency of the radio.
Receive Power This field lists the current combined receive power level, in dBm.