Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 48 / 649

Chapter 1: Configuration Quick link setup
Page
1-20
Viewing the Session Status of the AP/BHM to determine test
registration
Once the SMs/BHS under test are powered on, return to the computing device to determine if the
SM/BHS units have registered to the AP/BHM.
Note
In order for accurate power level readings to be displayed, traffic must be present on the
radio link.
The Session Status tab provides information about each SM/BHS that has registered to the AP/BHM.
This information is useful for managing and troubleshooting a system. All information that you have
entered in the Site Name field of the SM/BHS displays in the Session Status tab of the linked AP/BHM.
The Session Status tab also includes the current active values on each SM( or BHS) (LUID) for MIR, and
VLAN, as well as the source of these values (representing the SM/BHS itself, Authentication Server, or
the AP/BHM and cap, if any—for example, APCAP as shown above).. As an SM/BHS registers to
the AP/BHM, the configuration source that this page displays for the associated LUID may change. After
registration, however, the displayed source is stable and can be trusted.
Idle subscribers may be included or removed from the session status display by enabling or disabling,
respectively, the Show Idle Sessions parameter. Enabling or disabling this parameter only affects the
GUI display of subscribers, not the registration status.
The SessionStatus.xml hyperlink allows user to export session status page from web management
interface of AP/BHM. The session status page will be exported in xml file.