Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 349 / 649

Chapter 2: Tools Using Spectrum Analyzer tool
Page
2-321
Min and Max
Frequencies in KHz Enter minimum and maximum frequencies to be scanned.
Set Min And Max to
Full Scan On the button press, it sets minimum and maximum allowed frequencies for
scanning.
Set Min And Max to
Center Scan +/-40
MHz On the button press, it sets minimum and maximum frequencies to ± 40 MHz
of center frequency for scanning.
Registered SM Count This field displays the MAC address and Site Name of the registered SM.
Maximum Count of
Registered SMs This field displays the maximum number of registered SMs.
SM Scanning
Bandwidth This field allows to select SM’s scanning bandwidth.
Duration This field allows operators to configure a specified time for which the
spectrum is scanned. If the entire spectrum is scanned prior to the end of the
configured duration, the analyzer will restart at the beginning of the
spectrum.
Perform Spectrum
Analysis on Boot Up
for One Scan This field when enabled performs Spectrum Analysis on every boot up for
one scan.
Continuous Spectrum
Analyzer
Start Continuous Spectrum Analysis
button ensures that when the SM is
powered on, it automatically scans the spectrum for 10 seconds. These
results may then be accessed via the Tools > Spectrum Analyzer GUI page.