Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 259 / 649

Chapter 1: Configuration Configuring syslog
Page
1-231
control whether it sends syslog messages. This allows an operator
to override the BHM settings for individual BHSs in a sector.
Syslog Minimum Level
Source
This control determines whether the BHS attempts to use the minimum
syslog level defined by the BHM, or whether it uses a local defined value
using the Syslog Minimum Level parameter.
• When set to BHM preferred, use local when BHM configuration
unavailable, and if the BHS can register with a BHM, then it uses the
Syslog Minimum Level defined on that BHM. If the BHS cannot register
then it uses its own Syslog Minimum Level setting.
When set to Local only the BHS will always use its own Syslog
Minimum Level setting and ignores the BHM’s setting.
Syslog Minimum Level
This provides a selection for the minimum syslog message severity that is
sent to the syslog server. Values range from fatal (highest severity and least
verbose) to info (lowest severity, maximum verbosity).
For example: If the Syslog Minimum Level is set to notice, then only
messages with severity notice and above are sent.