Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 424 / 649

Chapter 3: Operation System information
Page
3-24
Viewing Session Status
The Session Status page in the Home page provides information about each SM or BHS that has
registered to the AP or BHM. This information is useful for managing and troubleshooting a system. This
page also includes the current active values on each SM or BHS for MIR and VLAN, as well as the source
of these values, representing the SM/BHS itself, Authentication Server, or the Authentication Server and
SM/BHS.
Note
For accurate power level readings to be displayed, traffic must be present on the
radio link.
The Session Status List has four tabs: Device, Session, Power, Configuration, and Link Quality.
The SessionStatus.xml hyper link allows user to export session status page from web management
interface of AP or BHM. The session status page will be exported in xml file.
Device tab
The Device tab provides information on the Subscriber’s LUID and MAC, Hardware, Software, FPGA
versions and the state of the SM/BHS (Registered and/or encrypted).
Table 120 Device tab attributes
Attribute Meaning
Subscriber This field displays the LUID (logical unit ID), MAC address and Site Name of
the SM/BHS.
Note
The MAC is a hot link to open the interface to the SM/BHS. In
some instances, depending on network activity and network
design, this route to the interface yields a blank web page. If
this occurs, refresh your browser view.
Site Name indicates the name of the SM/BHS. Change this name on the
Configuration web page of the SM/BHS. This information is also set into the
sysName SNMP MIB-II object and can be polled by an SNMP management
server.