Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 310 / 649

Chapter 1: Configuration Configuring a RADIUS server
Page
1-282
Attribute Meaning
Authentication Key
The authentication key is a 32-character hexadecimal string used when
Authentication Mode is set to AP PreShared Key. By default, this key is set
to 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF.
Select Key
This option allows operators to choose which authentication key is used:
Use Key above means that the key specified in Authentication Key is used
for authentication
Use Default Key means that a default key (based off of the SM’s MAC
address) is used for authentication
Enforce
Authentication
The SM may enforce authentication types of AAA and AP Pre-sharedKey.
The SM will not finish the registration process if the AP is not using the
configured authentication method (and the SM locks out the AP for 15
minutes). Enforce Authentication default setting is Disable.
Phase 1
The protocols supported for the Phase 1 (Outside Identity) phase of
authentication are EAPTTLS (Extensible Authentication Protocol Tunneled
Transport Layer Security) or MSCHAPv2 (Microsoft Challenge-Handshake
Authentication Protocol version 2).
Phase 2
Select the desired Phase 2 (Inside Identity) authentication protocol from the
Phase 2 options of PAP (Password Authentication Protocol), CHAP
(Challenge Handshake Authentication Protocol), and MSCHAP (Microsoft’s
version of CHAP, version 2 is used). The protocol must be consistent with
the authentication protocol configured on the RADIUS server.