Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 430 / 649

Chapter 3: Operation System information
Page
3-30
Configuration tab
The Configuration tab provides information on the SMs or BHS Uplink or Downlink (UL/DL) Sustained
Data Rate, UL/DL Burst Allocation, UL/DL Burst Rate, UL/DL Low Priority CIR, UL/DL Medium Priority
CIR UL/DL High Priority CIR, UL/DL Ultra High Priority CIR, the UL/DL Broadcast or Multicast Allocation,
SM Prioritization Group, RADIUS Authentication Reply, and RADIUS Authentication Server. This data is
refreshed based on the Web Page Auto Update setting on the AP’s or BHS’s General Configuration
page.
Table 123 Configuration tab attributes
Attribute Meaning
Subscriber See Table 120 on page 3-24.
LUID See Table 120 on page 3-24.
Sustained Data Rate
Cap (kbps) This field specifies the maximum sustained data rate between SM/BHS and
AP/BHM. If this field displays “Uncapped”, then there is no limit set for data
rate. If this field displays 4000, then the maximum sustained data rate
between SM/BHS and AP/BHM is limited to 4000 kbps.
Sustained Data Rate
(kbps) - Uplink This field displays the value that is currently in effect for the SM/BHS, with
the source of that value in parentheses. This is the specified rate at which
each SM/BHS registered to this AP/BHM is replenished with credits for
transmission. The configuration source of the value is indicated in
parentheses.
See Maximum Information Rate (MIR) Parameters on page 1-236 .
Sustained Data Rate
(kbps) - Downlink This field displays the value that is currently in effect for the SM/BHS, with
the source of that value in parentheses. This is the specified the rate at which
the AP/BHM should be replenished with credits (tokens) for transmission to
each of the SMs/BHS’s in its sector. The configuration source of the value is
indicated in parentheses.
See Maximum Information Rate (MIR) Parameters on page 1-236.
Burst Allocation (kbit)
- Uplink This field displays the value that is currently in effect for the SM/BHS, with
the source of that value in parentheses. This is the specified maximum
amount of data that each SM/BHS is allowed to transmit before being
recharged at the Sustained Uplink Data Rate with credits to transmit more.
The configuration source of the value is indicated in parentheses.