Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 74
Server Address
When the SNTP client is enabled, enter the IP address of an SNTP Server.
Period
Enter the amount of time in seconds between that will elapse between each time the SNTP server will be polled to
obtain the current time. The default setting is 64 seconds (1 minute, 4 seconds) between polling.
SNTP UTC Time
Display the time received from the SNTP Server (in seconds) when it was most-recently polled. (This field is read-
only and non-zero only when SNTP client is enabled and an SNTP server has been polled.
Time Zone
Time Zone
Allows you to select the time zone applicable for the location of the Viper. Facilitates translation of UTC time to
local time.
Daylight Saving
Allows you to specify whether Daylight Saving time is in effect for the locale and time of year where the Viper is
located.
Local Time
Displays the local date and time (to seconds) when the SNTP client is enabled, an SNTP server has been polled, and
settings for time zone and daylight saving time have been configured correctly.
Save
— Click Save to save any changes you have made in this tab.
Cancel
— Click Cancel to cancel any changes you may have made to any of the settings in this tab.
