Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 107
A VPN deployment consisting of multiple isolated VPN servers can employ a different Master Key per server for
additional security, since redeploying VPN clients to other servers would require their Master Key to be changed to
match the new server’s key.
Figure 65 – Security – VPN
Access To Settings
VPN Password
Enter the VPN password (leave the field empty if not set) and click Login to be able to access and change VPN-
specific configuration settings.
Clear VPN Password Master Key
— Permits access to VPN configuration settings when the VPN password is unknown.
Service Control
Enable VPN
— Enables the VPN service on the Viper.
Note:
For packets to securely pass over the network, the VPN service must be enabled on
both
tunnel endpoints.
Disable VPN
— Disables the VPN service on the Viper.
Note:
For packets to pass over the network insecurely, the VPN service must be disabled on
both
tunnel endpoints.
Enable VPN Clients
(available on VPN servers only) — Sends a VPN Enable command to all clients regardless of the VPN
server’s state.
Notes:
–
The command is broadcast a few times based on the Network Latency VPN setting. A server can send only one
command at a time.
–
When VPN clients with a user accessing the VPN configuration cannot process commands from the server.
