Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 37
-
To return to the Home page Unit Status tab from any tab in the Viper Web Interface, click the
Home
link.
-
The Viper router can be reset if necessary by clicking the
Reset
link. You will be asked to confirm that you want to
reset the router and the Viper Web Interface will be unavailable until after the Viper powers up.
Any time you change a parameter in a tab, you must confirm the change by clicking the applicable button at the
bottom of the web page tab.
4.1.
HOME
The Home page of the Viper Web Interface contains three tabs: Unit Status, RF Status, and Basic Settings.
4.1.1.
UNIT STATUS
The Unit Status tab is the first tab displayed when navigating to the Viper Web interface. To return to this tab, select
Home from the main navigation menu (or click the Home link at the upper right). From this tab you can view Unit
Identification and Status information for the Viper router.
Figure 26 – Home – Unit Status tab
Unit Identification and Status
Station Name
User-defined name given to the unit for ease of reference and used by various services. The Station Name can be
configured in the Basic Settings tab.
Model Number
The model or product catalog number of the Viper router.
LAN IP Address
The LAN IP Address assigned to the Viper. LAN IP Address, Network Mask, and Gateway are configured in the LAN
Settings tab.
