Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 34
3.7.3.
SETUP WIZARD STEP 3: RADIO SETUP
The page for Step 3 of the Viper Setup Wizard allows you to set basic radio parameters for the Viper. Settings include
the radio bandwidth (in kilohertz), Data And Control Packet Bit Rate (in kilobits per second, or kbps), Receive Frequency
and Transmit Frequency (in megahertz), and Transmit power (in Watts).
Figure 22 – Viper Setup Wizard Step 3
Default settings for this page vary by Viper model and organization that determines compliance for the country or
geographical area in which it is operated. These factors typically determine available frequency range, bandwidth, and
transmit power. Refer to RF Exposure Compliance Requirements and the frequency range specified for the model
number in the General Specifications. Selecting a frequency range or transmit power that is out of compliance (in the
country where used) could void the user’s authority to operate the equipment.
When finished, click
Apply
to save any settings you have made in this page and then click
Next
to proceed to Step 4 on
the following page.
