Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 118
Figure 69 – Diagnostics – SNMP
SNMP
SNMP Agent
Enable or disable the internal SNMP agent by selecting the appropriate option. The default setting is Disabled.
Local IP Address
The Viper can be programmed to respond to SNMP queries to its local IP Address, RF, or Ethernet IP address
(Automatic), or respond to its Ethernet IP address (Ethernet), or respond to its RF IP Address (RF). Select either
Automatic, Ethernet, or RF. The default setting is Automatic.
Read Community
The password string entered in the Read Community field grants read-only access to external MIB browsers.
Read-Write Community
The password string entered in the Read-Write Community field grants read-write access to external MIB
browsers.
Trap Community
The password string entered in the Trap Community field is included in SNMP trap packets.
Trap IP List
This list shows the user-programmed IP addresses where the Viper will send SNMP traps. To add an IP Address to
the list, select the Add radio button, enter the IP address into the address field (a.b.c.d), and then click Save (near
the bottom of the tab). When the page is refreshed, the IP address you entered will appear in the Trap IP List.
To delete an IP address from the list, select the Delete radio button, enter the IP address to be deleted in the
address field (a.b.c.d), and click Save (near the bottom of the tab).
