CAKEWALK UA-1G, Руководство пользователя

Страница: 47 / 64

47
Troubleshooting
Is the driver installed correctly?
Make settings as described in “Driver installation and settings” (p. 15).
Did you make input/output device settings for your software?
Select the UA-1G in the audio driver settings of your software. Refer to the documentation for
the software you’re using, and to the following pages.
Windows Vista:
“Input/output device settings” (p. 19)
Windows XP:
“Input/output device settings” (p. 23)
Mac OS X:
“Input/output device settings” (p. 26)
Could your computer have entered standby (suspend), hibernate, or sleep mode
during playback/recording?
If your computer enters standby (suspend), hibernate, or sleep mode during playback/
recording, the UA-1G may stop operating correctly. Close all software that uses the UA-1G,
disconnect the UA-1G’s USB cable, and then reconnect it.
If this does not solve the problem, restart your computer.
* If your computer enters standby (suspend), hibernate, or sleep mode during playback/
recording, try changing the power conservation settings of your computer. For details on how
to do this, refer to your computer’s documentation.
Could you have disconnected and reconnected the USB cable during playback/
recording?
If you disconnect and reconnect the USB cable during playback/recording, it may become
impossible to play back/record on the UA-1G. If this occurs, stop playback/recording, and
then perform playback/recording once again. If you are still unable to play back or record,
close all software that uses the UA-1G, disconnect the UA-1G’s USB cable, and then reconnect
it.
Do the sample rate settings match?
The sample rate setting of your software must match the sample rate setting of the UA-1G
itself.
* After changing the sample rate setting of the UA-1G itself, you must close all software that uses
the UA-1G, disconnect the UA-1G’s USB cable from your computer, and then reconnect it.
Cannot play/record
UA-1G_e.book 47 ページ ２００８年１２月１０日 水曜日 午後２時５０分