CAKEWALK UA-1G, Руководство пользователя

Страница: 44 / 64

44
Troubleshooting
Is the driver installed correctly?
If you’re unable to use the UA-1G even after installing the driver, it’s possible that the driver
was not installed correctly. Uninstall the UA-1G driver as described in “Removing the driver”
(p. 51), and then reinstall it as described in “Driver installation and settings” (p. 15).
Is the UA-1G device name shown?
If the device name is not shown, close all software that uses the UA-1G, disconnect the
UA-1G’s USB cable, and then reconnect it.
If this does not solve the problem, uninstall the UA-1G driver as described in “Removing the
driver” (p. 51), and then reinstall it as described in “Driver installation and settings” (p. 15).
Could the computer to which the UA-1G is connected have entered standby (suspend)
mode, hibernate mode, or sleep mode?
If your computer enters standby (suspend), hibernate, or sleep mode while the UA-1G is
connected, the UA-1G may not operate correctly when the computer returns to normal
operation. Close all software that uses the UA-1G, disconnect the UA-1G’s USB cable, and then
reconnect it.
Could you have disconnected and reconnected the USB cable while using the UA-1G?
If you disconnect and reconnect the USB cable while using the UA-1G, it may stop operating
correctly. In this case, close all software that uses the UA-1G, disconnect the UA-1G’s USB
cable, and then reconnect it. If this does not solve the problem, restart your computer.
On some computers, the UA-1G may be unusable if it is already connected when
Windows starts up.
If so, connect the UA-1G after Windows has started up.
Problems when using the UA-1G
Can’t select/use the UA-1G device
UA-1G_e.book 44 ページ ２００８年１２月１０日 水曜日 午後２時５０分