CAKEWALK UA-1G, Руководство пользователя

Страница: 51 / 64

51
Troubleshooting
Your computer may fail to correctly recognize the UA-1G if the driver could not be installed
according to the specified procedure. If so, you’ll need to delete the driver that was detected
by mistake. Use the following procedure to remove the driver, and then install the driver once
again according to the procedure given in “Driver installation and settings” (p. 15).
Windows users
* The displayed content may differ depending on your system.
1. Start up Windows with the UA-1G disconnected.
Make sure that all USB cables other than those for a USB keyboard and USB mouse (if used)
are disconnected.
Log on using a user name whose account type is computer administrator (such as
Administrator).
2. Insert the included UA-1G CD-ROM into your computer’s CD-ROM drive.
3. On the CD-ROM, navigate to the following folder and double-click Uninstal.exe
Windows Vista: Driver\Vista\Uninstal.exe
Windows XP: Driver\XP\Uninstal.exe
4. If you’re using Windows Vista, a user account control warning will appear; click [Continue] .
5. The screen will indicate “The installed UA-1G Driver will be uninstalled.” Click [OK] .
If any other message appears, proceed as directed by the message.
6. The screen will indicate “Uninstallation was completed.” Click [OK] to restart Windows.
Removing the driver
UA-1G_e.book 51 ページ ２００８年１２月１０日 水曜日 午後２時５０分