CAKEWALK UA-1G, Руководство пользователя

Страница: 48 / 64

48
Troubleshooting
Could the UA-1G’s sample rate be set to 96 kHz?
If the UA-1G’s [SAMPLE RATE] switch is set to 96 kHz and the [96 kHz MODE] switch is set to
REC , you won’t hear the audio playback from your software.
If the UA-1G’s [SAMPLE RATE] switch is set to 96 kHz and the [96 kHz MODE] switch is set to
PLAY , you won’t be able to record into your software from an instrument or audio device
connected to the UA-1G.
Could the system volume be turned down?
Try adjusting the volume of your system.
Windows Vista users:
1. Open the Control Panel , and click Hardware and Sound .
* If you’re using the Classic View, click Control Panel Home to exit the Classic View.
2. In Sound, click Adjust system volume .
3. The Volume Mixer will appear. From the Device menu, select the UA-1G’s OUT and adjust
the volume.
4. Adjust the Device or Application volume.
* If the Mute button is on, click the mute button once again to turn it off.
* You can also access the volume mixer by right-clicking the speaker icon located in the
bottom right corner of your screen, and choosing Open Volume Mixer .
Windows XP users:
1. Open the Control Panel , and double-click Sounds and Audio Devices .
* If you don’t see the Sounds and Audio Devices icon, click Sounds, Speech, and Audio
Devices , and then click Sounds and Audio Devices .
2. Click the Audio tab.
3. In the Sound playback area, make sure that OUT (UA-1G) is selected as the Default
device , and click [Volume] .
4. The Volume Control will appear; adjust the Wave volume.
* If the Mute setting is checked, clear the check mark.
Macintosh users:
1. In System Preferences , click Sound .
2. Click the Output tab.
3. In the Choose a device for sound output field, make sure that the UA-1G is selected, and
use the Output volume slider to adjust the volume.
* If Mute is checked, clear the check mark.
UA-1G_e.book 48 ページ ２００８年１２月１０日 水曜日 午後２時５０分