CAKEWALK UA-1G, Руководство пользователя

Страница: 43 / 64

43
Troubleshooting
1. If you are asked whether you want to connect to Windows Update, choose No and click
[Next] .
2. Choose Install the software automatically (Recommended) , and click [Next] .
3. If the Install Hardware dialog box appears, click [Continue Anyway] to continue the
installation.
* If you’re unable to continue, click [OK] to temporarily quit the installation. Then change the
settings as described in “Driver signing option settings (Windows XP)” (p. 42), and reinstall
the driver.
4. If Completing the Found New Hardware Wizard appears, click [Finish] .
3.
The screen will indicate “Completing the Found New Hardware Wizard.”
Click [Finish] to close the Driver Setup dialog box.
4.
If the Change System Settings dialog box appears, click [Yes] to restart Windows.
If you’re unable to complete the installation by using the above procedure, uninstall the
UA-1G driver as described in “Removing the driver” (p. 51), and then reinstall the driver as
described in “Installing the driver” (p. 20).
Could you have connected the UA-1G to a different USB port?
If you connect the UA-1G to a different USB port, some operating systems may automatically
add a number to the beginning of the device name, but this should not be a problem when
using the UA-1G.
If you want to return to the state in which the device name does not have this added number,
you can either connect the UA-1G to the same USB port as when you installed it, or uninstall
the UA-1G driver as described in “Removing the driver” (p. 51) and then reinstall it as
described in “Driver installation and settings” (p. 15).
A number such as “2-” appears at the beginning of the device name
UA-1G_e.book 43 ページ ２００８年１２月１０日 水曜日 午後２時５０分