CAKEWALK UA-1G, Руководство пользователя

Страница: 19 / 64

19
Driver installation and settings
In order to use the UA-1G with your software, you’ll need to select the UA-1G as the audio input/
output device. For details on how to do this, refer to the documentation for your software.
MIDI OUT device
* If you’re using ASIO compatible software, select the UA-1G in the ASIO settings of your
software.
* If you’re unable to select the UA-1G as the audio input/output device in your software, it
may be that a problem has occurred. Refer to “Troubleshooting” (p. 40).
Settings when using the UA-1G in Windows Media Player
Some software such as Windows Media Player will use the system default playback/recording
device for its audio input/output device.
Here’s how to specify the UA-1G as the system default playback device so that it can be used
with Windows Media Player.
* In a later step, you’ll use Windows Media Player to play back sample data. Be sure to make
the settings described below.
1.
Open the Control Panel , click the Hardware and Sound and click Sound .
* If you’re using the Classic view, double-click Sound .
2.
Open the Playback tab, select the UA-1G’s OUT , and click [Set Default] .
* If you’re unable to select the UA-1G, refer to the troubleshooting section “Can’t select/use
the UA-1G device” (p. 44).
3.
Click [OK] to complete the setting.
* If you select the UA-1G as the default device, audio alerts and other sounds from Windows
will be output from the UA-1G; they will not be heard from your computer’s speakers.
This completes driver installation and settings. Next, verify that you hear sound from the UA-1G.
➝
“Verifying that you hear sound” (p. 28).
Input/output device settings
Audio output device OUT (UA-1G)
Audio input device IN (UA-1G)
Caution when recording or playing back with your software
Check the following points before you use the UA-1G to record or play back.
• Connect the UA-1G to your computer before you start up the software you’re using.
• Do not disconnect the UA-1G’s USB cable from your computer while your software is
running. Close the software you’re using before you disconnect the UA-1G’s USB cable
from your computer.
UA-1G_e.book 19 ページ ２００８年１２月１０日 水曜日 午後２時５０分