manualshive.com logo in svg

CAE SimuFlite Citation Bravo, Руководство по подготовке пилотов

Поделиться
Скачать
CAE SimuFlite Citation Bravo Скачать руководство пользователя страница 274

4-22

Developed for Training Purposes

Citation Bravo

September 2005

CAE SimuFlite

Cruise Fuel

The amount of fuel required for cruise is the sum of the fuel flow rates
determined for each hour or part of an hour at cruise. Use the Cruise
table (

Figure 4-6

).

Time at cruise was computed previously as 1.87 hours (1 hour, 52
minutes). Fuel flow for the first hour is 917 lbs/hr at an aircraft
weight of 14,229 lbs.

The cruising weight for the second hour is obtained by subtracting the
fuel used during the first hour from the first hour aircraft weight.

Thus, an aircraft weight of 14,229 lbs minus 917 lbs fuel is 13,312 lbs.

To determine second hour fuel consumption, perform the following.

1. Enter the table at the weight of the aircraft at the beginning of the

second hour (

13,312 lbs

).

For this example, use the next highest weight, or 13,500 lbs.

2. Move to the right to read temperature, fan RPM, and fuel flow. 

The temperature is -57°C, the fan setting is 90.0%, and the fuel flow
is 924 lbs/hr.

3. Calculate second hour fuel consumption.

When 0.87 hour (i.e., 52 minutes) is multiplied by 924, the result is
803.88 lbs (rounded to 804 lbs).

4. Add the fuel values to determine fuel required at cruise.

Adding the 917 lbs for the first hour to the 804 lbs for the final 52
minutes yields a total cruise fuel consumption of 1,721 lbs.

Содержание Citation Bravo















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды