manualshive.com logo in svg

CAE SimuFlite Citation Bravo, Руководство по подготовке пилотов

Поделиться
Скачать
CAE SimuFlite Citation Bravo Скачать руководство пользователя страница 170

CAE SimuFlite

3C-8

Developed for Training Purposes

Citation Bravo

September 2005

sequencing with the autopilot mode.
After tuning and identifying the PF's
NAVAID, the PM announces
“(Facility) tuned and identified.”

Monitor NDB audio output at any
time that the NDB is in use as the
NAVAID. Use the marker beacon
audio as backup to visual annuncia-
tion for marker passage confirmation.

In tuning the VHF radios for ATC
communication, the PM places the
newly assigned frequency in the head
not in use (i.e.preselected) at the time
of receipt. After contact on the new
frequency, the PM retains the previ-
ously assigned frequency for a rea-
sonable time period.

Altitude Assignment

The PM sets the assigned altitude in
the altitude alerter and points to the
alerter and points to the alerter while
orally repeating the altitude.  The PM
continues to point to the Altitude
alerter until the PF confirms the alti-
tude assignment and ASEL setting.

During an instrument final approach
segment, the altitude alerter is set for
missed approach altitude instead of
MDA.

Pre-Departure Briefings

The PIC should conduct a pre-depar-
ture briefing prior to each flight to
address potential problems, weather
delays, safety considerations, and
operational issues. 

Pre-departure briefings should
include all crewmembers to enhance
team-building and set the tone for the
flight. The briefing may be formal or
informal, but should include some
standard items. The acronym
AWARE works well to ensure that no
points are missed. This is also an
opportunity to brief the crew on any
takeoff or departure deviations from
the SOP that are due to weather or
runway conditions.

Advising of Aircraft 
Configuration Change

If the PF is about to make a change
to aircraft control or configuration,
he alerts the PM to the forthcoming
change (e.g., gear, speed brake, and
flap selections). If time permits, he
also announces any abrupt flight
path changes so there is always
mutual understanding of the in-
tended flight path.

Time permitting, a PA announce-
ment to the passengers precedes
maneuvers involving unusual deck
or roll angles.

Transitioning from 

Instruments to Visual 

Conditions

If visual meteorological conditions
(VMC) are encountered during an
instrument approach, the PM nor-
mally continues to make callouts for
the instrument approach being con-
ducted. However, the PF may
request a changeover to visual traffic
pattern callouts.

NOTE:

The acronym AWARE 

stands for the following:

n

Aircraft status

n

Weather

n

Airport information

n

Route of flight

n

Extra

Содержание Citation Bravo















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды